[1] Xu Zhang, Qian Zhao, Zhipeng Cai, and Jiluan Pan. Effects of Magnetic Field on the Residual Stress and Structural Defects of Ti-6Al-4V [J]. Metals, 2020, 10(1):
[2]Li X, Li K, Li S, Wu Y, Cai Z*, Pan J. Microstructure and high temperature fracture toughness of NG-TIG welded Inconel 617B superalloy[J]. Journal of Materials Science & Technology, 2020, 39: 173-182.
[3] Hou M, Li K, Li X, Zhang X, Rui S, Wu Y, Cai Z*. Effects of Pulsed Magnetic Fields of Different Intensities on Dislocation Density, Residual Stress, and Hardness of Cr4Mo4V Steel[J]. Crystals, 2020, 10(2): 115.
[4] Li S, Li K, Hu M, Wu Y, Cai Z*, Pan J. The Mechanism for HAZ Liquation of Nickel-Based Alloy 617B During Gas Tungsten Arc Welding[J]. Metals, 2020, 10(1): 94.
[5] Li X, Li K*, Cai Z*, Pan J. A Review of Austenite Memory Effect in HAZ of B Containing 9% Cr Martensitic Heat Resistant Steel[J]. Metals, 2019, 9(11): 1233.
[6] Zhang Y, Li K, Cai Z*, Pan J. Creep rupture properties of dissimilar metal weld between Inconel 617B and modified 9% Cr martensitic steel[J]. Materials Science and Engineering: A, 2019, 764: 138185.
[7] 许擎栋, 李克俭, 蔡志鹏*, 吴瑶. 脉冲磁场对TC4 钛合金微观结构的影响及其机理探究[J]. 金属学报, 2019, 55(4): 489-495
[8] Li Y, Li K, Cai Z*, Pan J, Liu X, Wang P. Alloy design of welding filler metal for 9Cr/2.25 Cr dissimilar welded joint and mechanical properties investigation[J]. Welding in the World, 2018, 62(6): 1137-1151.
[9] Hu M, Li K, Cai Z*, Pan J. A new weld material model used in welding analysis of narrow gap thick-walled welded rotor[J]. Journal of Manufacturing Processes, 2018, 34: 614-624.
[10] Li S, Li K, Cai Z*, Pan J. Behavior of M23C6 phase in Inconel 617B superalloy during welding[J]. Journal of Materials Processing Technology, 2018, 258: 38-46.
[11] Han C, Li K, Liu X, Cao R, Cai Z*. Effect of Ti content and martensite–austenite constituents on microstructure and mechanical property[J]. Science and Technology of Welding and Joining, 2018, 23(5): 410-419.
[12] Li K, Wu Y, Li Y, Cai Z*. Mechanism for welding liquation cracking in a boron containing 9% Cr martensitic stainless steel[J]. Journal of Manufacturing Processes, 2018, 32: 714-720.
[13] Li Y, Cai Z*, Li K, Pan J, Liu X, Sun L, Wang P. Investigation of local brittle zone in multipass welded joint of NiCrMoV steel with heavy section[J]. Journal of Materials Research, 2018, 33(8): 923-934.
[14] Xia Liu; Zhipeng Cai; Sida Yang; Kai Feng; Zhuguo Li. Characterization on the Microstructure Evolution and Toughness of TIG Weld Metal of 25Cr2Ni2MoV Steel after Post Weld Heat Treatment. Metals,2018, 160
[15] X. Zhang, Z. P. Cai. Effect of magnetic field on the nano-hardness of monocrystalline silicon and its mechanism. JETP Letters,2018, 1-2
[16] Li K, Cai Z*, Wu Y, Pan J. Research on austenite transformation of FB2 heat-resistant steel during welding heating process[J]. Acta Metall Sin, 2017, 53(7): 778-788.
[17] Liu, X ; Cai, Zp ; Deng, XL ; Lu, Fg. Investigation on the weakest zone in toughness of 9Cr/NiCrMoV dissimilar welded joint and its enhancement. Journal Of Materials Research,2017, 3117-3127
[18] Cai, Zp ; Ai, Bq ; Cao, R ; Lin, Q ; Chen, Jh. Microstructure and properties of aluminum AA6061-T6 to copper(Cu)-T2 joints by cold metal transfer joining technology. Journal Of Materials Research,2016, 2876-2887
[19]Li K, Cai Z*, Li Y F, Pan J. Constitutional liquation of the laves phase in virgin FB2 steel[J]. Weld. J, 2016, 95: 257S-263S.
[20] Li, K. ; Cai, Z. ; Pan, J. THE EVOLUTIONARY BEHAVIOR OF LAVES PHASE IN VIRGIN FB2 STEEL DURING WELDING AND ITS EFFECT ON WELD JOINTS. Advances in Materials Technology for Fossil Power Plants - Proceedings from the 8th International Conference,2016, 974-982
[21] 郑云蔚, 蔡志鹏, 何雨晨, 李克俭, 潘际銮. 异种钢窄间隙焊母材熔合比对碳迁移现象影响研究[J]. 机械工程学报,2016,12:74-80.
[22]Li K, Cai Z*, Li Y, Pan J. Evolution behavior of Laves phase in FB2 martensitic stainless steel during welding[J]. Acta Metall Sin, 2016, 52(6): 641-648
[23] Huo, X. ; Wang, P. ; Hu, M. ; Cai, Z. ; Pan, J. The Influence of Prior Austenite Grain Size on Fatigue Crack Growth Threshold of welds in CrMoV Steel Components. Advances in Materials Technology for Fossil Power Plants - Proceedings from the 8th International Conference,2016, 610-621
[24] Ding, Y. ; Xu, X. ; Zheng, Y. ; Cai, Z. ; Pan, J. Influence of Fusion Ratio on Carbon Migration Phenomenon in the Narrow Gap Welding of Dissimilar Metals in 9% Chromium Steels. Advances in Materials Technology for Fossil Power Plants - Proceedings from the 8th International Conference,2016, 1207-1216
[25] 蔡志鹏, 王梁, 潘际銮, 乔尚飞, 霍鑫, 王朋, 刘霞. 回火冷却速度对贝氏体焊缝韧性的影响[J]. 清华大学学报(自然科学版),2015,10:1045-1050.
[26] 蔡志鹏, 何雨晨, 李克俭, 郑云蔚, 潘际銮.用位错溶质复合体模型解释马氏体异种钢焊接接头碳迁移过程[J]. 清华大学学报(自然科学版),2015,03:316-321.
[27] 孙林根, 蔡志鹏, 潘际銮, 王朋, 霍鑫, & 齐艳娜.. 核电汽轮机焊接低压转子1∶1模拟件接头高周疲劳性能及门槛值预测[J]. 焊接学报,2015,05:99-103+118
[28] 孙林根, 蔡志鹏, 潘际銮, 刘霞, 丁玉明, 许晓进. 核电汽轮机低压焊接转子模拟件接头高周疲劳性能研究[J]. 中国机械工程, 2015, 3102-3107
[29] 张伯奇, 蔡志鹏, 李克俭, 李轶非, 潘际銮. 异种钢焊接接头蠕变过程的有限元模拟[J]. 中国机械工程,2015, 266-271
[30] 李轶非, 蔡志鹏, 汤之南, 潘际銮, 刘霞, 孙林根. 焊接接头低周疲劳性能薄弱区转移[J]. 清华大学学报(自然科学版),2015,10:1056-1060+1066.
[31] 李克俭, 蔡志鹏, 李轶非, 胡梦佳, 潘际銮. 长期高温时效对有碳迁移发生的焊接接头的影响[J]. 清华大学学报(自然科学版),2015,10:1051-1055.
[32] 李克俭, 蔡志鹏, 李轶非, 孙林根, 何雨晨, 潘际銮. 碳迁移对9%Cr和2.25%Cr异种钢焊接接头高温韧性的影响[J]. 机械工程学报,2015,16:150-155
[33] 汤之南, 蔡志鹏, 吴健栋. 热影响区元素晶界偏聚对焊接构件低周疲劳性能的影响[J]. 机械工程学报,2015,14:78-85.
[34] 吴健栋, 蔡志鹏, 汤之南, 李克俭, 王梁, 潘际銮, 霍鑫, 许晓进. 低周疲劳过程损伤变量的复合分析法和三阶段损伤演化模型[J]. 机械工程学报,2015,10:86-95.
[35] 李克俭, 蔡志鹏, 李轶非, 潘际銮, & 孙林根. B元素对FB2马氏体耐热钢热影响区组织和高温断裂韧度的影响[J]. 机械工程学报,2015,24:69-74.
[36] Wen, Peng ; Cai, Zhipeng ; Feng, Zhenhua ; Wang, Gang. Microstructure and mechanical properties of hot wire laser clad layers for repairing precipitation hardening martensitic stainless steel. Optics and Laser Technology,2015, 207-213
[37] Ma, Ninshu ; Cai, Zhipeng ; Huang, Hui ; Deng, Dean ; Murakawa, Hidekazu ; Pan, Jiluan.vInvestigation of welding residual stress in flash butt joint of U71Mn rail steel by numerical simulation and experiment. Materials & Design,2015, 1296-1309
[38] Jiang, Yanqi ; Gong, Qianming ; Cai, Zhipeng ; Shao, Yang ; Zhuang, Daming ; Liang, Ji. Fabrication of CrSi2/MoSi2/SiCMo2C gradient composite coating on Mo substrate and the stabilizing effect of Cr on the coating's antioxidation properties. Surface & Coatings Technology,2015, 188-199
[39] 蔡志鹏, 吴健栋, 汤之南, 张伯奇, 潘际銮, 刘霞. 汽轮机焊接转子接头低周疲劳过程损伤变量的复合分析法[J]. 清华大学学报(自然科学版),2014,02:178-184.
[40] 李轶非, 蔡志鹏, 潘际銮, 刘霞, 王朋, 霍鑫, 沈红卫. NiCrMoV耐热钢汽轮机转子焊缝韧性薄弱区的成因[J]. 焊接学报,2014,10:73-76+80
[41] 孙林根, 蔡志鹏, 潘际銮, 刘霞, 许晓进, 丁玉明. 核电汽轮机转子焊缝金属原奥氏体尺寸对疲劳裂纹稳定扩展区和近门槛区临界点的影响规律研究[J]. 中国机械工程, 2014, 3378-3384
[42] 张伯奇, 蔡志鹏, 李克俭, 潘际銮. 过渡层Cr元素梯度对异种钢接头高温持久性能的影响[J]. 清华大学学报(自然科学版),2014,06:828-833.
[43] 屈岳波, 曹彬, 王梁, 张伯奇, 吴健栋, 蔡志鹏, 潘际銮. 窄间隙埋弧焊接头熔合区弱化的研究[J]. 清华大学学报(自然科学版),2014,03:305-308.
[44] CAI Zhi-peng, ZHANG Bo-qi, PAN Ji-luan, LIU Xia, QIAO Shang-fei,SHEN Hong-wei. Residual Stress of Joints of Welded Turbine Rotors, Part 4 : Residual Stress Distribution for 1∶1 Verification Product of Nuclear Power LP Turbine Rotors. Thermal Turbine,2013, 47-50
[45] 蔡志鹏, 李轶非, 潘际銮, 刘霞, 乔尚飞, 许晓进,沈红卫. 汽轮机焊接转子接头残余应力研究五:低压转子锻件焊接修复及热处理后残余应力[J]. 热力透平,2013,02:90-92.
[46] 张伯奇, 蔡志鹏, 吴健栋, 潘际銮, 刘霞,乔尚飞,许晓进,霍鑫,沈红卫. 回火参数对NiCrMoV转子钢焊缝时效韧性的影响[J]. 电焊机,2013,12:27-32
[47] 李轶非, 蔡志鹏, 潘际銮, et al. NiCrMoV转子钢贝氏体焊缝韧性影响因素研究[J]. 热力透平, 2013, 42(1):35-39.
[48] 吴健栋, 蔡志鹏, 潘际銮, 刘霞, 乔尚飞, 王朋, 霍鑫, 沈红卫. 疲劳裂纹扩展门槛值的影响因素综述[J]. 热力透平,2013,02:84-89+127
[49] 李轶非, 王梁, 吴健栋, 蔡志鹏, 潘际銮, 刘霞, 乔尚飞, 丁玉明, 沈红卫. NiCrMoV耐热钢贝氏体焊缝韧性薄弱区的确定[J]. 机械工程学报,2013,04:83-88.
[50] 蔡志鹏, 曹彬, 潘际銮, 刘霞, 乔尚飞,沈红卫. 汽轮机焊接转子接头残余应力研究三:125MW及1000MW汽轮机低压焊接转子产品残余应力[J]. 热力透平,2012,01:54-59
[51] 曹彬, 蔡志鹏, 潘际銮, 乔尚飞, 刘霞, 沈红卫. NiCrMoV钢汽轮机焊接转子模拟件接头低周疲劳性能研究[J]. 热力透平,2012,41(04):256-260.
[52] 张伯奇, 蔡志鹏, 王梁, 吴健栋, 潘际銮. 厚板窄间隙埋弧焊焊缝阶梯形断口形成机理研究[J]. 机械工程学报,2012,24:67-72.
[53] Cai, Zhipeng ; Huang, Xinquan. Residual stress reduction by combined treatment of pulsed magnetic field and pulsed current. Materials Science & Engineering A,2011, 6287-6292 [54] 蔡志鹏, 黄欣泉, 潘际銮, 刘霞, 乔尚飞, 沈红卫. 汽轮机焊接转子接头残余应力研究一: 25Cr2Ni2MoV钢核电转子模拟件热处理前后残余应力的对比[J]. 热力透平,2011,03:159-164
[55] 蔡志鹏, 屈岳波, 潘际銮, 刘霞, 乔尚飞, 沈红卫. 汽轮机焊接转子接头残余应力研究二: 带有弹性槽的30Cr2Ni4MoV模拟件热处理前后残余应力变化[J]. 热力透平,2011,04:231-234
[56] 蔡志鹏, 赵海燕, 鹿安理, 潘际銮, 线宏智, 姚东. 钢轨焊接接头平直度的影响因素[J]. 中国铁道科学,2011,01:20-24.
[57] 黄欣泉, 蔡志鹏. 电磁复合处理降低焊接残余应力增益效应的初步研究[J]. 机械工程学报,2011,04:88-92
[58] Zhang Ruihua ; Cai Zhipeng ; Pan Jiluan. Numerical simulation of the molten pool character in high power fiber laser welding. CHINA WELDING,2011, 22-26
[59] 车洪艳, 蔡志鹏, 屈岳波, 和平安.正火温度对钢轨窄间隙自动电弧焊焊接接头硬度和组织的影响[J]. 机械工程材料,2011,01:50-53.
[60] 屈岳波, 蔡志鹏, 车洪艳, 潘际銮. 正火处理对钢轨窄间隙接头硬度和组织的影响[J].焊接学报,2011,07:25-29+114.
[61]屈岳波, 黄欣泉, 曹彬, 蔡志鹏, 潘际銮.残余奥氏体对2.25Cr1Mo钢焊缝冲击性能的影响[J]. 机械工程学报,2011,14:44-48.
[62] 蔡志鹏, 林健. 磁处理过程中磁致伸缩与残余应力关系的研究[J]. 机械工程学报2010,22:36-40.
[63] 蔡志鹏, 林健, 赵海燕, 鹿安理. 45#钢在低频间歇磁场作用下晶界移动现象的研究[J]. 清华大学学报(自然科学版),2010,07:984-988.
[64] Zhang, Zenglei ; Shi, Qingyu ; Yan, Dongyang ; Cai, Zhipeng ; Li, Decheng. ESTABLISHMENT AND APPLICATION OF FIXTURE CONSTRAINT MODELS IN FINITE ELEMENT ANALYSIS OF WELDING PROCESS. Acta Metallurgica Sinica,2010, 189-194
[65] Lu, L. ; Zhao, H. Y. ; Cai, Z. P. ; Wang, P. C. ; Fickes, John. Modelling of deformation and failure of crash toughened adhesive bonded lap shear joints. Science and Technology of Welding and Joining,2008, 479-483
[66] Lin, Jian ; Zhao, Haiyan ; Cai, Zhipeng ; Lei, Yongping. Study on the relationship between magnetovibration and residual stress in steel materials. Acta Metallurgica Sinica,2008, 451-456
专利：
[1] 一种降低铁磁性金属材料残余应力的方法
[2] 轴承处理方法和轴承处理设备
[3] 一种预测焊接接头疲劳裂纹扩展门槛值的方法
[4] 一种预测不同应力比下疲劳裂纹扩展门槛值的方法
[5] 一种贝氏体钢焊接接头韧性的检测方法
[6] 一种以温度为控制变量的焊接数值模拟计算方法
